Check out the complete details of Android 2.3.3 Gingerbread firmware file:
The firmware version of KIES is : P1000XXJPZ.
Firmware Version: 2.3.3
Versione banda base : P1000XXJPZ Base-band version: P1000XXJPZ
Versione Kernel : 2.6.35.7 – se-infra@SEP-52 #2
Kernel Version: 2.6.35.7 – if infra-SEP-52 @ # 2
Numero build : GINGERBREAD.XXJQ1
Build Number: GINGERBREAD.XXJQ1
Samsung Galaxy Tab P1000XXJPZ users can easily be upgrade their Android powered devices, they simply need to flash Android 2.3.3 update manually using ODIN utility. Follow our complete step-by-step on how to install or update Android 2.3.3 Gingerbread on Samsung Galaxy Tab below.
* Download Samsung Galaxy Tab Android 2.3.3 Gingerbread firmware file with bootloader or without bootloader file from here (firmware file version without bootloaders may not work for some) and extract the firmware zip
* Download gt-p1000 _mr_PIT.zip and extract zip file
* Download dbdata.zip and unzipped the file
* Download Odin3 v1.7 Utility tool
Step 2: Flash the firmware tar as PDA, repartition enabled, use the attached PIT
Step 3: After flash immediately boot into download mode again
Step 4: Flash dbdata.tar as PDA (NO repartition)
Step 5: After flash immediately boot into recovery mode
Step 6: Wipe cache
Step 7: Wipe data / factory reset
Now you should successfully have installed Android 2.3.3 Gingerbread on Samsung Galaxy
That’s it , Now enjoy your Samsung Galaxy Tab Android 2.3.3 Gingerbread.
SOURCE
The firmware version of KIES is : P1000XXJPZ.
Firmware Version: 2.3.3
Versione banda base : P1000XXJPZ Base-band version: P1000XXJPZ
Versione Kernel : 2.6.35.7 – se-infra@SEP-52 #2
Kernel Version: 2.6.35.7 – if infra-SEP-52 @ # 2
Numero build : GINGERBREAD.XXJQ1
Build Number: GINGERBREAD.XXJQ1
Samsung Galaxy Tab P1000XXJPZ users can easily be upgrade their Android powered devices, they simply need to flash Android 2.3.3 update manually using ODIN utility. Follow our complete step-by-step on how to install or update Android 2.3.3 Gingerbread on Samsung Galaxy Tab below.
Step-By-Step Instructions:
Step 1: Firstly you need to download all the required files one by one, starting from below:* Download Samsung Galaxy Tab Android 2.3.3 Gingerbread firmware file with bootloader or without bootloader file from here (firmware file version without bootloaders may not work for some) and extract the firmware zip
* Download gt-p1000 _mr_PIT.zip and extract zip file
* Download dbdata.zip and unzipped the file
* Download Odin3 v1.7 Utility tool
Step 2: Flash the firmware tar as PDA, repartition enabled, use the attached PIT
Step 3: After flash immediately boot into download mode again
Step 4: Flash dbdata.tar as PDA (NO repartition)
Step 5: After flash immediately boot into recovery mode
Step 6: Wipe cache
Step 7: Wipe data / factory reset
Now you should successfully have installed Android 2.3.3 Gingerbread on Samsung Galaxy
That’s it , Now enjoy your Samsung Galaxy Tab Android 2.3.3 Gingerbread.
SOURCE
What do u mean by "flash" as used here above in step 4 & 5? I dont have any technical knowledge of upgrading softwares like this except basic PC software upgrades. Please can you help me with this. Thanks
ReplyDelete